yap!
Sitios diferentes
Anti Theft Alarm System Components ( Removal and Refiiting )
Electronic ( Body ) control module.
Removal.
1) Remove the drivers side ( LHD models) lower facia panel
2) Release the locking catch and disconnect the module wiring plug.
3) Releasse the 4 clips and remove the module.
Volumetric sensor.
1) Carefully remove the cover from the rear of the front interior light.
2) Remove the switch panel cover from the interior light.
3) Release the clips and remove the sensor. Disconnect the sensor wiring plug as it's withdrawn.
Siren.
1) The siren is located behind the right - hand side luggage compartment side trim panel on some models, and behind the front bumper on others. Remove the panel or bumper.
3) Undo the 2 retaining bolts, disconnect the wiring plug and remove the siren.