SAABsPORTUGAL
Oficina => Electricidade / Electrónica => Tópico começado por: classico em 03 de Novembro de 2015, 19:15
Não posso fechar as portas com o comando, que o alarme acaba por ser activado. Não sei que se passe e onde recorrer.
Alguem me dá uma dica?
Obrigado
Provavelmente necessitas trocar as baterias do módulo de alarme do carro.
Abraço
Sim , muito possivelmente foram as pilhas do modulo de alarme que foram a vida, tens varios kits desses a venda no ebay, para ja recomendava desligares a ficha do modulo de alarme que esta por dentro da cave de roda do lado esquerdo, deixo-te aqui uma dica de como fazeres.... O0
https://www.saabsportugal.com/forum/index.php?topic=1673.75 (https://www.saabsportugal.com/forum/index.php?topic=1673.75)
Ele tem um 9-3 SS, não um 9-5 não sei se o Alarme está no mesmo sitio.
yap!
Sitios diferentes
Anti Theft Alarm System Components ( Removal and Refiiting )
Electronic ( Body ) control module.
Removal.
1) Remove the drivers side ( LHD models) lower facia panel
2) Release the locking catch and disconnect the module wiring plug.
3) Releasse the 4 clips and remove the module.
Volumetric sensor.
1) Carefully remove the cover from the rear of the front interior light.
2) Remove the switch panel cover from the interior light.
3) Release the clips and remove the sensor. Disconnect the sensor wiring plug as it's withdrawn.
Siren.
1) The siren is located behind the right - hand side luggage compartment side trim panel on some models, and behind the front bumper on others. Remove the panel or bumper.
3) Undo the 2 retaining bolts, disconnect the wiring plug and remove the siren.
Caro amigo
Obrigado pelas dicas, vou solicitar que façam o que dizes
Um abraço